Using acquirecontrol, Using 3rd party solutions, Using national instruments software – ALLIED Vision Technologies Goldeye P-032 SWIR User Manual
Page 37: Using acquirecontrol using 3rd party solutions
Performance optimization
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
37
Using AcquireControl
1.
Close AcquireControl.
2.
Go to the installation directory.
3.
Open the file UniGrab.ini with a text editor.
4.
Find the GRABBER_ section with the description Gigabit Ethernet (iPORT)
5.
Find the value PacketSize and enter the determined Jumbo Frame size –
72 bytes.
6.
Save the file and start AcquireControl again.
Using 3rd party solutions
Using National Instruments software
1.
Start MAX.
2.
Open the camera.
3.
In the lower pane open the Acquisition Attributes tab, find the packet
size value and enter the determined Jumbo Frame size – 72 bytes.
This manual is related to the following products: