ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 42)

Appendix
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
42
ImageSizeControl
AcquisitionControl
Feature Description
SensorWidth Maximum width of the sensor in pixels.
SensorHeight Maximum height of the sensor in pixels.
WidthMax This feature represents the maximum width (in pixels) of the
image after horizontal binning, decimation or any other function
changing the horizontal dimensions of the image.
HeightMax This feature represents the maximum height (in pixels) of the
image after vertical binning, decimation or any other function
changing the vertical dimensions of the image.
Width This feature represents the actual image width expelled by the
camera (in pixels).
Height This feature represents the actual image height expelled by the
camera (in pixels).
OffsetX This feature represents the horizontal offset from the origin to
the AOI (in pixels).
OffsetY This feature represents the vertical offset from the origin to the
AOI (in pixels).
BinningHorizontal Number of horizontal pixels to combine together. This increases
the intensity (or signal-to-noise ratio) of the pixels and reduces
the horizontal resolution (width) of the image.
BinningVertical Number of vertical pixels to combine together. This increases the
intensity (or signal-to-noise ratio) of the pixels and reduces the
vertical resolution (height) of the image.
DecimationHorizontal Unused.
DecimationVertical Unused.
PixelFormat List with all available pixel formats of the camera, e.g. MONO12.
TestImageSelector Enables or disables the internal test image generator of the
camera.
HighSpeedMode Turn on or off the high-speed mode with reduced resolution.
Table 6: Camera standard feature: ImageSizeControl
Feature Description
AcquisitionMode This feature controls the acquisition mode of the software. This
feature works independently (!) of the chosen camera mode
(Continuous, IOD hardware trigger, IOD hardware timer). It
describes how many frames should be acquired.
AcquisitionStart Starts the image acquisition of the camera.
Table 7: Camera standard feature: AcquisitionControl