ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 33)

Display camera live images
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
33
Using Pleora GEVPlayer
The Pleora GEVPlayer is an application which can grab images from a camera
with GigE Vision compliance. All Bigeye/Pearleye/Goldeye cameras are GigE
Vision V1.2 compliant.
1. Start GEVPlayer.
2. Click Select / Connect to select the camera and set IP (if necessary).
3. Click Play.
4. If you want to switch between a GigE Vision application (e.g. GEVPlayer)
and an iPORT application (e.g. AcquireControl), it is necessary to power
cycle the camera.
Using Bigeye/Pearleye/Goldeye cameras with
3rd party solutions
Using National Instruments software
In order to work with LabView or compatible applications, it is necessary to have
the NI IMAQdx driver installed. Without this driver it is not possible to access a
GigE Vision camera!
To test the camera, start the MAX (Measurement & Automation Explorer) soft-
ware.
1. Whether the IMAQdx driver is installed correctly can be verified in the
Software branch:
Note

In order to work with a GigE Vision compatible camera it is nec-
essary to use at least Pleora driver version 2.3.3.