ALLIED Vision Technologies Goldeye P-032 SWIR User Manual
Page 34
Display camera live images
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
34
2.
Open the Devices and Interfaces branch. After a few seconds the camera
should appear.
3.
Click once on the camera entry. Now every register of the camera is read
which can take a few seconds.
4.
In the lower pane of the MAX software now several controls appear for
accessing the camera parameters. Please also refer to Chapter
on page 41 for more information regarding the registers.
5.
Click Grab to start continuous grab.
•
In some situations the software can’t access the camera correctly any-
more. Here it may help to reset the device cache of the NI software. Quit
Figure 25: IMAQdx driver
Figure 26: MAX: CameraAttributes
This manual is related to the following products: