ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 13)

IP settings: preliminary considerations
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
13
Static IP address
The camera can also use a static IP address. This address can be set while con-
necting to the camera with AVT AcquireControl software.
Static Persistent IP address
Here the camera gets a static IP address which is stored persistently in the cam-
era. So after every power up of the camera the same IP address is available.
Note

The Pleora driver has to be installed to run this application.
Figure 2: Select static IP address
Example: PC 192.168.1.1 Set by the user once
Camera 192.168.1.2 Set by the user manually after
every camera power up.
Example: PC 192.168.1.1 Set by the user once
Camera 192.168.1.2 Set by the user once