Static persistent ip for gige vision camera – ALLIED Vision Technologies Goldeye P-032 SWIR User Manual
Page 14
IP settings: preliminary considerations
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
14
Static Persistent IP for GigE Vision camera
To store a persistent IP for a camera with GEV firmware, use the Pleora software
GEVPlayer. Please refer to Chapter
Installing GigE driver from Pleora
1.
Open GEVPlayer, select the camera and set the desired persistent IP
2.
Open the GEV Device Control dialog and change the following values:
GevCurrentIPConfigurationPersistentIP
Set to true
GevPersistentIPAddress
Set IP Address
GevPersistentSubnetMask
Set Subnet Mask
Figure 3: GEV Device Selection
This manual is related to the following products: