ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 17)

General tips for setting IP addresses
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
17
3. It is also possible to add a second (or even more) IP address(es) to the
NIC. In this case the Pleora IP engine always uses the bottom entry of the
IP list:
Example: This NIC works with two IP ranges:
• Static IP address for LAN traffic
• LLA for a camera
To verify which NIC IP address is used by the Pleora IP engine, click on the NIC
entry during camera selection process.
Figure 6: Pleora IP engine uses the bottom entry of the IP list
Figure 7: IP Engine Selection