ClimaCool SHC onDEMAND 30, 50, 70, 85 Manual User Manual

Page 30

www.climacoolcorp.com

Page

Project Name:

Contractor Name:

Address:

City/State

City/State:

Start-up Date:

Phone No.:

Model No.:

Serial No.:

Serial No. 1:

Chiller No.:

Serial No. 2:

Evaporator:

Yes

N/A

Condenser:

Yes

N/A

Source

Yes

N/A

Evaporator, Condenser & Source "flow devices" shut of chiller below approx 25% loss of flow:

Yes

ŹAll wiring terminations in module panel, safeties and compressors tightened:

Yes

L1/L2

L2/L3

L1/L3

Amperage: L1

HEAT COOL

HEAT

COOL

Sight Glass Oil Level:

Suction Pressure:

Suction Temperature:

Compressor Superheat:

Discharge Pressure:

Liquid Line Temperature:

Liquid Subcooling:

Evaporator Leaving Water Temp.:

Condenser Entering Water Temp.:

Condenser Leaving Water Temp.:

Evaporator Pressure Differential:

Condenser Pressure Differential:

Software Version

Verify Safety Setting Limits:

Low Temp:

Rep Signature:

Print Name:

E-Signature:

Phase / Phase

Compressor Circuit # 1

Voltage / Ground

Ź Rotation of scroll compressor is correct

Low Voltage (24V):

Compressor:

Module:

Bank Water Pressures Entering/Leaving

Ambient

Temp:

For initial MANDATORY water samples, bottles are provided. Follow instructions on label and mail

the same day sample is taken.

Bank No.:

(Authorized Signature)

High Pressure:

Evaporator Entering Water Temp.:

Water Samples Taken: (Mark "X")

Compressor Circuit #2

Low Pressure:

High Pressure:

Low Pressure:

Startup and Warranty Registration Form (SHC onDEMAND

)

1 of 1

Email [email protected] or Fax 405-815-3052

&KHFN%R[

Low T

High

Low

Low T

High

Low

Doc#: SHC onDEMAND® StartupWarranty 10.22.13

)