CEMB USA C88 EVO (C) - Manual (Page 10)

10
Use and maintenance manual Rev. 02-2010
ENGLISH
Control panel
4.1 AUTOMATIC DISTANCE AND DIAMETER
GAUGE
This gauge allows measurement of the distance of the wheel
from the machine and the wheel diameter at the point of appli-
cation of the counterweight. It also allows correct positioning
of the counterweights on the inside rim by using the specifi c
function (
INDICATION OF EXACT CORRECTION WEIGHT
POSITION
) which allows reading, on the monitor, the position
used for the measurement within the rim (for calibration, see
the corresponding section).
4.2 SONAR DEVICE FOR AUTOMATIC WIDTH
MEASUREMENT
Width gauging is through a SONAR device which measures
the distance of the wheel without mechanical contact, merely
by closing the guard and each time a valid measurement has
been made with gauge
AUTOMATIC DISTANCE AND DIAME-
TER GAUGE
.
4.3 TOUCH screen
The function keys are selected by pressing on the touch
screen.
CAUTION
P RESS THE BUTTONS WITH YOUR FINGERS .
N EVER USE THE COUNTERWEIGHT GRIPPERS OR
OTHER POINTED OBJECTS !
4. Control panel and components