CEMB USA ER100 - Manual (Page 64)

64
use and maintenance manual Rev. 11-2011
ENGLISH
8.3.6 Wheel runout
Decreases the value
Increases the value
Confirms the default parameters
Goes back to the reserved setup screen
Return to main screen
wheel first harmonic limit: Represents the first harmonic limit beyond which it is considered appropriate
to turn the tyre on the rim by 180°. Recommended limit = 1.2 mm.
rim first harmonic limit: Represents the first harmonic limit of the rim below which it is not considered
appropriate to turn the tyre on the rim.
Recommended limit = 0.3 mm.
Minimum correction limit: Represents the minimum correction limit obtainable below which it is not
considered appropriate to turn the tyre on the rim. Recommended limit =
0.8 mm.
default parameter setting: Resets the default machine settings.
Reserved Setup