CEMB USA ER100 - Manual (Page 50)

50
use and maintenance manual Rev. 11-2011
ENGLISH
The machine automatically reads the rim dimensions and performs a spin.
During rotation the outside eccentricity measurement is executed on the inner and outer edges of the rim in the posi-
tions laid down by the international standards.
When complete, a screen with the graphs of the values just measured is displayed.
Repeats the outside rim eccentricity measurement
Goes back to the measurement screen
Return to main screen
Identifies the rim outside
Identifies the rim inside
Outside rim runout within tolerance
Outside rim runout out of tolerance
Use of the wheel balancing machine
The outside rim runout measured on the edges of the rim is deemed within tolerance if both the first harmonic
and the peak/peak values measured are less than the limits set in
oUTsiDe riM rUnoUT setup