B&K Precision 2640 - Manual - Manual (Page 61)

61
Reset
The function of Reset is for initializing the memory or system.
The three kinds of resets are supported. And these resets are run
through the Menu
 Preset
System Reboot for initial setup status.
(Center Frequency, Span Frequency, Marker and etc)
 Memory CLR
The user
’s saved data will be cleared. (Memory Cleared)
 System INIT
The upper two resets (PRESET and MEMORY CLR) are run.
Then, system reboot for initial setup status and the user
’s saved data will
be cleared
STEP 1
- Push the Menu key
STEP 2
- To select the RESET, use the Up/Down keys or Knob
key and push the Enter key.
- Then, sub menu is opened.
STEP 3
- To run the wanted Reset, use the Up/Down keys or Knob
key and push the Enter key.
- Then, the selected reset will be run