B&K Precision 2640 - Manual - Manual (Page 11)

11
Overview
The B&K Precision 2640 handheld RF Field Strength Analyzer is
optimized to analyze signals from many different source for multiple
applications. The B&K Precision 2640 has adopted a synthesizer method
and has a wideband reception range of 100 kHz to 2,000 MHz. The
characteristic of frequency response of the B&K Precision 2640 is
calculated by memorized calculation data from a
“look up table”, and so it
enables the B&K Precision 2640 to measure accurate levels and make
easy analysis of a wide range of frequency bands.
The B&K Precision 2640 provides various functions and user-friendly
interface which makes it easy to use. The handheld RF Field Strength
Analyzer is ideal for users to test, install and maintain Mobile
Telecommunications Systems, Cellular and Cordless Phone, CB Paging,
Paging Systems, Cable and Satellite TV Systems as well as antenna site
measurements and maintenance. The B&K Precision 2640 supports RS
232C serial communication and has separate GUI software. So, user can
control the B&K Precision 2640 easily after connecting the B&K Precision
2640 with a personal computer, and can utilize the analyzed data
variously after converting or saving numerical value or graph.
Introduction (section 1)