B&K Precision 4052-4055 - Programming Manual - Manual (Page 29)

25
1.19. Get arbitrary wave data command
DESCRIPTION This command changes the user defined memory unit arbitrary wave
data.
COMMAND SYNTAX
WaVe_DaTa
:= {a parameter from the table below. }
Parameters Value Description
WVNM arbitrary wave name
TYPE
Arbitrary wave type .Note the value has
to be set to 5.
LENGTH
Arbitrary wave data Length. It must be
set to "32KB"
FREQ Arbitrary wave frequency.
AMPL Value of amplify.
OFST Value of offset.
PHASE Value of phase.
WAVEDATA Wave data.
Not: All parameters must be set in one command. If not, the command will not execute
successfully.
QUERY SYNTAX
WaVe_DaTa
RESPONSE FORMAT
WaVe_DaTa
EXAMPLE Read device memory saved arbitrary data.
WVDT M50?
return:
WVDT POS, M51, WVNM, WAVE02, LENGTH, 32KB, TYPE, 5, WAVEDATA,\x00?\x03\x00\x06
\x00\t\x00\f\x00\x0f \x00\x12\x00\x15\x00\x19\x00\x1c\x00\x1f \x00"\x00%\x00(\x00+\x
00/\x002\x005\x008\x00;\x00>\x00A\x00E\x00H\x00K\x00N\x00Q\x00T\x00W\x00[\x00^\
x00a\x00d\x00g\x00j\x00m\x00q\x00t\x00w\x00z\x00}\x00\x80\x00\x83\x00\x87\x00\x8a
\x00\x8d\x00\x90\x00\x93\x00\x96\x00\x99\x00\x9d\x00\xa0\x00\xa3\x00\xa6\x00\xa9\x
00\xac\x00\xaf \x00\xb3\x00\xb6\x00\xb9\x00\xbc\x00\xbf \x00\xc2\x00\xc5\x00\xc9\x00\
xcc\x00\xcf \x00\xd2\x00\xd5\x00\xd8\x00\xdb\x00\xdf \x00\xe2\x00\xe5\x00\xe8\x00\xeb
\x00\xee\x00\xf1\x00\xf4\x00\xf8\x00\xfb\x00\xfe\x00\x01\x01\x04\x01\a\x01\n