Autel Autolink AL619 - Manual (Page 58)

57
Figure 6.17
11) Select the Control Unit entry to enter the System Menu option
screen, and choose the desired Control Module entry for DTC
information stored in the vehicle’s on-board computer. (Figure
6.18)
Figure 6.18

If there is not any Diagnostic Trouble Code, the display indicates
“No (pending) codes are stored in the module!” Wait a few
seconds or press any key to return to previous screen.
NOTE: In this manner, the scan tool will communicate with
the vehicle being tested. If there is a linking error, please refer
to 3.8 Product Troubleshooting.
NOTE: If the vehicle does not support ABS/SRS
communication, an advisory message shows on the Scan
Tool’s display. Follow the screen instruction to exit the
system.
Select An Option
1.Control Unit
2.Vehicle Information
System Menu
1.ABS/TCS—Anti-Lock Brake/
Traction Control Module
2.RCM—Restraint Control Module