Autel Autolink AL619 - Manual (Page 13)

12
3) Storage Temperature: -20 to 70°C (-4 to 158 F°)
4) External Power: 8.0 to 18.0 V power provided via vehicle
battery
5) Dimensions:
Length Width Height
199 mm (7.83”) 104.5 mm (4.11”) 37.5 mm (1.48”)
6) Weight: 0.28kg(without wire) 0.484kg(with wire)
3.3 Accessories Included
1) User’s Manual -- Instructions on tool operations.
2) CD -- Includes user’s manual, MaxiLink update software, and
etc.
3) OBDII cable -- Provides power to tool and communicates
between tool and vehicle.
4) USB cable -- Used to print retrieved data.
5) Protective Nylon Case – A nylon case to store the tool when
not in use.
6) TF card -- Used to store data and to upgrade the scan tool
3.4 Keyboard
No solvents such as alcohol are allowed to clean the keypad or display.
Use a mild nonabrasive detergent and a soft cotton cloth. Do not soak
the keypad as the keypad is not waterproof.
3.5 Power
The scan tool is powered via the vehicle Data Link Connector (DLC).
Just follow the steps below to turn on the scan tool:
1) Connect the OBD II Cable to scan tool.
2) Find DLC on vehicle.

A plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the OBDII cable.
3) Plug OBD II cable to the vehicle’s DLC.