Autel Autolink AL619 - Manual (Page 54)

53
To finish this procedure, please follow these steps (Taking Ford as
an example):
1) Select the Ford Logo from the car make screen. (Figure 6.2)
2) Use the UP/DOWN scroll button to select the Manual Vehicle
Entry option from the DAS menu. (Figure 6.9)
Figure 6.9
3) To enable scan tool to identify the vehicle specifications,
follow the onscreen instructions to the Option menu, and select
one of the three entries: PCM Part Number, Calibration
Number or Tear Tag to fill up the vehicle information.
(Figure 6.10)
Figure 6.10
4) Taking the Tear Tag option for example, you will need to fill
up accurate vehicle information in the input entry on the menu
screen. (Figure 6.11)
DAS
1.Start New Session
2.Manual Vehicle Entry
3.Vehicle selection
Select An Option
1.PCM Part Number
2.Calibration Number
3.Tear Tag