Autel Autolink AL619 - Manual (Page 16)

15
2) From Unit of Measure screen, use the LEFT/RIGHT scroll
button to select the desired unit of measurement. (Figure 3.4 )
Figure 3.4
3) Press the OK button to save your selection and return to previous
menu. Or, press the ESC button to exit without saving.
Beep Set

The default setting is Beep On.
1) From System Setup screen, use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select Beep and press the
OK button.
2) From Beep Set menu, use the LEFT/RIGHT scroll button to
select ON or OFF to turn on/off the beep. (Figure 3.5)
Figure 3.5