AUMA Electric multi-turn actuators SA 07.1 - 16.1_SAR 07.1 - 16.1 MATIC AM 01.1 - 02.1 - Manual (Page 39)

If the setting is subject to subsequent change, the marking also has to be
changed. Furthermore, the wiring diagram indicated on the name plate of the
actuator controls also changes (see page 61).
39
Multi-turn actuators SA 07.1 – SA 30.1/ SAR 07.1 – SAR 30.1
Operation instructions with actuator controls AUMA MATIC AM 01.1 / AM 02.1
Programming
Command signal
Setpoint E1
Feedback
Actual value E2 1)
via DIP switch S1-7
(see figure AF)
4 – 20 mA
0 – 20 mA 4 – 20 mA
0 – 20 mA
4 – 20 mA
0 – 20 mA
0 – 5 V
0 – 5 V
4 – 20 mA
0 – 20 mA
0 – 5 V 0 – 5 V
0 – 10 V
4 – 20 mA
0 – 20 mA
0 – 10 V 0 – 5 V
1) Signals for internal feedback:
0/4 – 20 mA from electronic position transmitter
or 0 – 5 V from precision potentiometer 5 k
Ω
Table 6: Possible settings