Atec Rohde-Schwarz-FSH Series - Manual (Page 14)

Version 15.01, July 2013
14 Rohde & Schwarz R&S ® FSH4/R&S ® FSH8/R&S ® FSH13/ R&S ® FSH20 Spectrum Analyzer
R&S ® FSH-K46 CDMA2000 ® BTS pilot channel and EVM measurement
application
R&S
® FSH-K46E CDMA2000 ® BTS code domain power measurement
application
The specifications below apply to the R&S ® FSH4 and R&S ® FSH8. They are based on the data sheet specifications of the R&S ® FSH4
and R&S ® FSH8, have not been checked separately and are not verified during instrument calibration. Measurement uncertainties are
indicated as 95 % confidence intervals. The specified level measurement errors do not take into account systematic errors due to
reduced signal-to-noise ratio (SNR).
Measurements R&S ® FSH-K46 R&S ® FSH-K46E
Spectrum overview ● ●
Result summary ● ●
RF channel power ● ●
Rho ● ●
Carrier frequency error ● ●
Active channels ● ●
Composite EVM ● ●
Peak to average ● ●
Pilot channel power (Cd 0) ● ●
Sync channel power (Cd 32) ● ●
Code domain power – ●
RF channel power – ●
Pilot power – ●
Sync power (rel. to RF ch. pwr./pilot) – ●
Code power (rel. to RF ch. pwr./pilot) – ●
Carrier frequency error – ●
Rho – ●
Composite EVM – ●
PN offset found – ●
Code domain channel table – ●
Channel type – ●
Walsh code/spreading factor – ●
Symbol rate (ksps) – ●
RC – ●
Status – ●
Power absolute (dBm) – ●
Power relative (rel. to RF ch. pwr./pilot) – ●
PN scanner – ●
Detected PN offset – ●
Power per detected PN offset – ●
All specifications are valid for RC3, one traffic channel, SNR > 30 dB.