Atec Rohde-Schwarz-SMJ100A - Manual (Page 7)

Version 05.00, December 2007 R&S ® SMJ100A Vector Signal Generator 7
Level
Setting range –145 dBm to +20 dBm
f ≤ 3 GHz +13 dBm (PEP) 2 Maximum level
f > 3 GHz +11 dBm (PEP)
Resolution 0.01 dB
for levels >–120 dBm, attenuator mode
Auto, temperature range +18 °C to +28 °C
1 MHz ≤ f ≤ 3 GHz <0.5 dB
Level uncertainty
f > 3 GHz <0.9 dB
Additional uncertainty with
ALC OFF, S&H This function is needed only in some
special applications. <0.2 dB
Output impedance
VSWR in 50
Ω system
ALC state ON
f ≤ 3 GHz
f > 3 GHz
<1.6, typ. <1.4
<1.85, typ. <1.6
after IEC/IEEE bus delimiter,
to <0.1 dB deviation from final value,
with GUI update stopped,
temperature range +18 °C to +28 °C
ALC state ON <2 ms, typ. 1.5 ms
ALC state OFF <4 ms, typ. 2.5 ms
Setting time 3
in List mode after trigger impulse to
<0.3 dB deviation from final value <450 µs, typ. 300 µs
with attenuator mode fixed, ALC state ON Uninterrupted level setting
setting range >20 dB
maximum permissible RF power in output
frequency range for f > 1 MHz
1 MHz ≤ f ≤ 3 GHz 50 W
f > 3 GHz 10 W
Back-feed (from ≥50 Ω source)
maximum permissible DC voltage 50 V
2 PEP = peak envelope power.
3 Installation of software that is not authorized by Rohde & Schwarz for use on the R&S ® SMJ100A or installation of antivirus software can deteriorate the
setting time performance.