Atec Rohde-Schwarz-SMJ100A - Manual (Page 4)

R&S ® SMJ100A Vector Signal Generator Version 05.00, December 2007 4
Key features
Intuitive operation
• Color display with 800 × 600 pixels (SVGA format)
• Intuitive user interface with graphical display of signal flow (block diagram)
• Graphical display of baseband signals through built-in transient recorder
• Context-sensitive help system
Outstanding signal quality
• I/Q modulator with 200 MHz RF bandwidth
• Very low SSB phase noise of typ. –133 dBc (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth)
• Wideband noise of typ. –153 dBc (CW, f = 1 GHz, >10 MHz carrier offset, 1 Hz measurement bandwidth)
• Excellent ACLR performance of typ. +69 dB with 3GPP FDD (test model 1, 64 DPCH)
• Very high level repeatability of 0.05 dB
• High-stability reference oscillator as standard
Unrivaled flexibility
• Support of EUTRA/LTE signal generation
• Support of WiMAX IEEE 802.16-2004/Corr1-2005, 802.16e-2005, and WiBro
• Four code channels in realtime for 3GPP FDD, support of HSDPA and HSUPA
• Support of WLAN IEEE 802.11a, b, g and n
• Change of modulation from slot to slot for GSM/EDGE
• Baseband generator with universal coder for realtime signal generation
• Arbitrary waveform generator with 16 Msample, 64 Msample or 128 Msample and multisegment support
• Arbitrary waveform generator supported by R&S ® WinIQSIM2 TM and R&S ® WinIQSIM TM simulation software
Ideal for production
• Very short frequency and level setting times (<2 ms); only 450 µs in List mode
• Electronic attenuator with overvoltage protection up to 6 GHz over full level range
• Flexible high speed measurements with RF List mode and multisegment waveforms
Connectivity
• Remote control via LAN (Gigabit Ethernet, VXI11) and GPIB
• Remote operation via Windows Remote Desktop or VNC
• User-selectable trigger and marker signals
• USB connectors for keyboard, mouse, and memory stick
• LXI class C compliance