Atec Rohde-Schwarz-SMJ100A - Manual (Page 28)

R&S ® SMJ100A Vector Signal Generator Version 05.00, December 2007 28
Digital standards (for the R&S
®
SMJ-B9/-B10/-B11)
An R&S ® SMJ-B9, R&S ® SMJ-B10, or R&S ® SMJ-B11 I/Q baseband generator is required. The specified data applies together with the
parameters of the respective standard. The entire frequency range as well as filter parameters and symbol rates can be set by the
user.
GSM/EDGE digital standard R&S ® SMJ-K40 option
3GPP FDD digital standard R&S ® SMJ-K42 option
3GPP FDD enhanced BS/MS tests
including HSDPA R&S ® SMJ-K43 option
GPS digital standard R&S ® SMJ-K44 option
3GPP FDD enhanced BS/MS tests
including HSUPA R&S ® SMJ-K45 option
CDMA2000 ® digital standard R&S ® SMJ-K46 option
1xEV-DO digital standard R&S ® SMJ-K47 option
IEEE 802.11a/b/g digital standard R&S ® SMJ-K48 option
IEEE 802.16 WiMAX digital standard
including IEEE 802.16e R&S ® SMJ-K49 option
TD-SCDMA (3GPP TDD LCR) digital
standard R&S ® SMJ-K50 option
TD-SCDMA (3GPP TDD LCR) enhanced
BS/MS tests including HSDPA R&S ® SMJ-K51 option
DVB-H digital standard R&S ® SMJ-K52 option
DAB / T-DMB digital standard R&S ® SMJ-K53 option
IEEE 802.11n digital standard R&S ® SMJ-K54 option
EUTRA/LTE digital standard R&S ® SMJ-K55 option
XM RADIO digital standard R&S ® SMJ-K56 option
Multicarrier CW signal generation R&S ® SMJ-K61 option
The options are described in the Digital Standards data sheet (PD 5213.9434.22).
Digital standards with external PC software
An I/Q baseband generator must be installed. R&S ® SMJ-K5 and -K8 require the R&S ® SMJ-B9, -B10, or -B11. R&S ® SMJ-K6 can be
used with theR&S ® SMJ-B9, -B10, -B11, -B50 or -B51.
Bluetooth ® digital standard (external PC
software)
R&S ® SMJ-K5 option
Pulse sequencer (external PC software) R&S ® SMJ-K6 option
TETRA digital standard (external PC
software) R&S ® SMJ-K8 option
The options are described in the Digital Standards data sheet (PD 5213.9434.22).