Atec Agilent-53200A Series - Manual (Page 11)

11
53210A 53220A 53230A
Measurement/IO timeout
(nom) no timeout or 10 ms to 2000 s, in 1 ms steps
Auto-level speed Slow mode (50 Hz): 350 ms (typ)
Fast mode (10 kHz): 10 ms (typ)
Configure-change speed Frequency, Period, Range, Level: 50 ms (typ)
Single measurement throughput 5 : readings/s
(time to take single measurement and transfer from volatile reading memory over I/O bus)
Typical (Avg. using READ?):
LAN (VXI-11) 110 120
LAN (sockets) 200 200
USB 200 200
GPIB 210 220
Optimized (Avg. using *TRG;DATA:REM? 1, WAIT):
LAN (VXI-11) 160 180
LAN (sockets) 330 350
USB 320 350
GPIB 360 420
Block reading throughput 5 : readings/s (Example uses: 50,000 readings)
(time to take blocks of measurements and transfer from volatile reading memory over I/O bus)
Typical (Avg. using READ?):
LAN (VXI-11) 300 990 8700
LAN (sockets) 300 990 9700
USB 300 990 9800
GPIB 300 990 4600
Optimized (Avg. using *TRG;DATA:REM? 1, WAIT):
LAN (VXI-11) 300 990 34700
LAN (sockets) 300 990 55800
USB 300 990 56500
GPIB 300 990 16300
Speed Characteristics 4 (meas)