Atec Agilent-53200A Series - Manual (Page 10)

10
53210A 53220A 53230A
Math operations
Smoothing (averaging) 1 Selectable 10 (slow), 100 (medium), 1,000 (fast) reading moving average
Selectable filter reset .1% /1000 ppm (fast), .03%/300 ppm (medium), .01%/100 ppm
(slow) change from average
Scaling mX-b or m(1/X)-b
User settable m and b (offset) values
∆-change (X-b)/b scaled to %, ppm, or ppb
User settable b (reference) value
Null (X-b)
User settable b (reference) value
Statistics 1 Mean, standard deviation,
Max, Min, Peak-to-Peak,
count
Mean, standard deviation, Allan deviation 2 , Max, Min, Peak-
to-Peak, count
Limit test 3 Displays PASS/ FAIL message based on user defined Hi/ Lo limit values.
Operation Individual and simultaneous operation of smoothing, scaling, statistics, and limit test
Graphical display selections
Digits Numeric result with input level shown
Trend Strip chart (measurements vs. readings over time)
Selectable screen time
Histogram Cumulative histogram of measurements; manual reset
HI/LO limit lines shown
Selectable bin and block size
Limit test Measurement result, tuning bar-graph, and PASS/FAIL message
Markers Available to read values from trend & histogram displays
Memory
Data log Guided setup of # of readings/counts;
automatically saves acquisition results to non-volatile memory
Instrument state Save & recall user-definable instrument setups
Power-off Automatically saved
Power-on Selectable power-on to reset (Factory), power-off state or user state
Volatile reading memory 1 M readings (16 MBytes)
Non-volatile internal
memory 75 Mbytes (up to 5 M readings)
USB file system Front-panel connector for USB memory device
Capability Store/recall user preferences and instrument states, reading memory,
and bit map displays
Math, Graphing and Memory Characteristics (nom)