Atec Agilent-N9000A-CXA - Manual (Page 17)

17
Rear panel (continued)
LAN TCP/IP interface
Standard
Connector
1000Base-T
RJ45 Ethertwist
Sync (reserved for future use)
Connector BNC female
IF output
Connector
Impedance
SMA female
50 Ω nominal
Wideband IF output, Option CR3 1
Center frequency
SA mode or I/Q analyzer 322.5 MHz
Conversion gain –4 to +7 dB (nominal) plus RF frequency response
Bandwidth
Low band
High band
Up to 120 MHz (nominal)
Up to 40 MHz (nominal)
1. Not available on microwave CXA (Option 513 or 526).