Atec Agilent-N9000A-CXA - Manual (Page 16)

16
Front panel
RF input
Connector Type-N female, 50 Ω nominal
RF input (Option C75)
Connector Type-N female, 75 Ω nominal
RF output (Option T03 or T06)
Connector Type-N female, 50 Ω nominal
Probe power
Voltage/current +15 Vdc, ± 7 % at 150 mA max. nominal
–12.6 Vdc, ± 10 % at 150 mA max. nominal
USB 2.0 ports
Master (2 ports)
Standard
Connector
Output current
Compatible with USB 2.0
USB Type-A female
0.5 A nominal
Rear panel
10 MHz out
Connector
Output amplitude
Frequency
BNC female, 50 Ω nominal
≥ 0 dBm nominal
10 MHz ± (10 MHz x frequency reference accuracy)
Ext Ref In
Connector
Input amplitude range
Input frequency
Frequency lock range
BNC female, 50 Ω nominal
–5 to 10 dBm nominal
10 MHz ± nominal
± 5 x 10 –6 of specified external reference input frequency
Trigger 1 input
Connector
Impedance
Trigger level range
BNC female
> 10 kΩ nominal
–5 to 5 V
Trigger 1 output
Connector
Impedance
Level
BNC female
50 Ω nominal
5 V TTL nominal
Monitor output
Connector
Format
Resolution
VGA compatible, 15-pin mini D-SUB
XGA (60 Hz vertical sync rates, non-interlaced) Analog RGB
1024 x 768
Noise source drive +28 V (pulsed)
Connector BNC female
SNS Series noise source
Analog out
Connector BNC female
USB 2.0 ports
Master (4 ports)
Standard
Connector
Output current
Slave (1 port)
Standard
Connector
Output current
Compatible with USB 2.0
USB Type-A female
0.5 A nominal
Compatible with USB 2.0
USB Type-B female
0.5 A nominal
GPIB interface
Connector
GPIB codes
GPIB mode
IEEE-488 bus connector
SH1, AH1, T6, SR1, RL1, PP0, DC1, C1, C2, C3, C28, DT1, L4, C0
Controller or device
Inputs and Outputs