Atec Anritsu-MG3710A - Manual (Page 9)

Data Sheet l MG3710A
9
ATT Hold
At move to ATT Hold, can adjust output level in 0.01-dB steps over ±10 dB range based on output level without stopping output (however, hi/lo
limits determined by level setting range)
Output Connector
Connector
N-J Connector, 50Ω (Front panel)
VSWR
without MG3710A-043
(Output Level: ≤–7 dBm)
1.45 (50 MHz ≤ f ≤ 3 GHz)
1.65 (3 GHz < f ≤ 4 GHz)
1.9 (4 GHz < f ≤ 6 GHz)
with MG3710A-043
(Output Level: ≤–10 dBm)
1.45 (50 MHz ≤ f ≤ 3 GHz)
1.65 (3 GHz < f ≤ 4 GHz)
1.9 (4 GHz < f ≤ 6 GHz)
without MG3710A-073
(Output Level: ≤–7 dBm)
1.45 (50 MHz ≤ f ≤ 3 GHz)
1.65 (3 GHz < f ≤ 4 GHz)
1.9 (4 GHz < f ≤ 6 GHz)
with MG3710A-073
(Output Level: ≤–10 dBm)
1.45 (50 MHz ≤ f ≤ 3 GHz)
1.65 (3 GHz < f ≤ 4 GHz)
1.9 (4 GHz < f ≤ 6 GHz)
Maximum Reverse Input Power
±50 VDC (max.)
without MG3710A-043
2 W (nom.)
with MG3710A-043
20 W (1 MHz < Frequency of Reverse Input Power ≤ 2 GHz) (nom.)
10 W (2 GHz < Frequency of Reverse Input Power ≤ 6 GHz) (nom.)
without MG3710A-073
2 W (nom.)
with MG3710A-073
20 W (1 MHz < Frequency of Reverse Input Power ≤ 2 GHz) (nom.)
10 W (2 GHz < Frequency of Reverse Input Power ≤ 6 GHz) (nom.)
Signal Purity
Harmonic Spurious
(CW, Optimize S/N: Off)
without MG3710A-043, or without MG3710A-073
without MG3710A-041
<–30 dBc (Output Level: ≤+4 dBm, 10 MHz ≤ f ≤ 3 GHz)
<–30 dBc (Output Level: ≤+4 dBm, f >3 GHz)
with MG3710A-041
<–30 dBc (Output Level: ≤+4 dBm, 10 MHz ≤ f < 50 MHz)
<–30 dBc (Output Level: ≤+12 dBm, 50 MHz ≤ f ≤ 3 GHz)
<–30 dBc (Output Level: ≤+4 dBm, f >3 GHz)
with MG3710A-043, or with MG3710A-073
without MG3710A-041
<–30 dBc (Output Level: ≤+1 dBm, 10 MHz ≤ f ≤ 3 GHz)
<–30 dBc (Output Level: ≤+1 dBm, f >3 GHz)
with MG3710A-041
<–30 dBc (Output Level: ≤+1 dBm, 10 MHz ≤ f < 50 MHz)
<–30 dBc (Output Level: ≤+9 dBm, 50 MHz ≤ f ≤ 3 GHz)
<–30 dBc (Output Level: ≤+4 dBm, f >3 GHz)