Atec Anritsu-MG3710A - Manual (Page 4)

4
Data Sheet l MG3710A
Frequency
Setting Range
1st SG
9 kHz to 2.7 GHz [MG3710A-032]
9 kHz to 4 GHz [MG3710A-034]
9 kHz to 6 GHz [MG3710A-036]
2nd SG
9 kHz to 2.7 GHz [MG3710A-062]
9 kHz to 4 GHz [MG3710A-064]
9 kHz to 6 GHz [MG3710A-066]
Resolution: 0.01 Hz
Phase Offset
Range: –180.00 deg. to +180.00 deg.
Resolution: 0.01 deg.
Switching Speed
≤600 µs
(Time from trigger input to final frequency ±0.1 ppm or within 100 Hz when executing List function at frequency of >187.5 MHz)
Internal Reference Oscillator
without MG3710A-001/002
Aging rate: ±1 × 10 –6 /year
Temperature characteristics: ±2.5 × 10 –6 (5° to 45°C)
with MG3710A-001
Start-up characteristics: 23°C, Referenced to frequency at 24 hours after power-on
±1 × 10 –9 (7.5 minutes after power-on)
Aging rate: ±1 × 10 –10 /month
Temperature characteristics: ±2 × 10 –9 (5° to 45°C)
with MG3710A-002
Start-up characteristics: 23°C, Referenced to frequency at 24 hours after power-on
±5 × 10 –7 (2 minutes after power-on)
±5 × 10 –8 (5 minutes after power-on)
Aging rate: ±1 × 10 –7 /year
Temperature characteristics: ±2 × 10 –8 (5° to 45°C)