Atec Anritsu-MG3710A - Manual (Page 3)

Data Sheet l MG3710A
3
Definitions
Typical (typ.)
Performance not warranted. Must products meet typical performance.
Nominal (nom.)
Values not warranted. Included to facilitate application of product.
Measured (meas)
Performance not warranted. Data actually measured by randomly selected measuring instruments.
Conditions of Specifications
The conditions are as follows unless specified otherwise.
CW/Modulation Mode
After 30-minute warm-up (at constant ambient temperature)
Pulse Modulation: Off
ATT Hold: Off
Optimize S/N Mode: Off
∗
: f > 2.7 GHz: Use MG3710A-034/036, MG3710A-064/066
f > 4 GHz: Use MG3710A-036, MG3710A-066
Modulation Mode only
Waveform pattern RMS value: At RMSw (Linear value) and each combination less than following ranges:
–3.00 dB ≤ RMSnom ≤ +3.00 dB
RMSnom = 20•log (RMSw/4628) (16-bit Data)
RMSnom = 20•log (RMSw/2314) (15-bit Data)
RMSnom = 20•log (RMSw/1157) (14-bit Data)
after CAL
∗ : Applies to MG3710A-062/064/066