Atec Agilent-N5183A - Manual (Page 16)

16
Security (Option 006) Memory sanitizing, memory sanitizing on power
on, and display blanking.
Self test Internal diagnostic routines test most modules
in a preset condition. For each module, if its
node voltages are within acceptable limits, the
module “passes” the test.
Weight ≤ 13.8 kg (30 lb.) net,
≤ 28.4 kg (62 lb.) shipping
Dimensions 103 mm H x 426 mm W x 432 mm L
(4.07 in H x 16.8 in W x 17 in L)
Recommended calibration cycle 24 months
ISO compliant The Agilent N5181A MXG is manufactured in an
ISO-9001 registered facility in concurrence with
Agilent Technologies’ commitment to quality.
Front panel connectors 1
RF output Output impedance 50 Ω (nom)
Option 520 Precision APC-3.5 male, or Type-N with
Option 1ED
Option 532/540 Precision 2.4 mm male; plus 2.4 – 2.4 mm and
2.4 – 2.9 mm female adapters
Maximum reverse power 0.5 W, 0 Vdc
USB 2.0 Used with a memory stick for transferring
instrument states, licenses and other files into
or out of the instrument. Also used with U2000
series USB average power sensors. For a
current list of supported memory sticks, visit
www.agilent.com/find/MXG, click on Technical
Support, and refer to FAQs: WaveformDownloads
and Storage.
Rear panel connectors 1
RF output Outputs the RF signal via a precision N type
(Option 1EM) female connector.
Sweep out Generates output voltage, 0 to +10 V when the
signal generator is sweeping. This output can
also be programmed to indicate when the source
is settled or output pulse video and is TTL and
CMOS compatible in this mode. Output
impedance < 1 Ω, can drive 2k Ω. Damage
levels are ±15 V.
AM External AM input. Nominal input impedance is
50 Ω. Damage levels are ±5 V.
FM External FM input. Nominal input impedance is
50 Ω. Damage levels are ±5 V.
Pulse External pulse modulation input. This input is
TTL and CMOS compatible. Low logic levels are
0 V and high logic levels are +1 V. Nominal input
impedance is 50 Ω. Input damage levels are
≤ –0.3 V and ≥ +5.3 V.
1. All connectors are BNC unless otherwise noted.