Atec Agilent-N5183A - Manual (Page 15)

15
Remote programming
Interfaces GPIB IEEE-488.2, 1987 with listen and talk
LAN 100BaseT LAN interface, LXI class C
compliant
USB Version 2.0
Control languages SCPI Version 1997.0
Compatibility languages supporting a subset of common commands
Agilent Technologies 8360 series, E8247C, E8257C, E8257D, E8241A,
E8244A, E8251A, E8254A, E4428C, E4438C,
E8267C/D, 8662A, 8663A, 83711B, 83712B,
83731B, 83732B, 83751B, 83752B, 8340B,
8341B
Power requirements 100 to 120 VAC, 50 to 60 Hz and 400 Hz
220 to 240 VAC, 50 to 60 Hz
250 W maximum
Operating temperature range 0 to 55 °C
Storage temperature range –40 to 70 °C
Operating and storage altitude 15,000 feet
Environmental stress Samples of this product have been type tested in
accordance with the Agilent Environmental Test
Manual and verified to be robust against the
environmental stresses of Storage, Transportation
and End-use; those stresses include but are not
limited to temperature, humidity, shock, vibration,
altitude and power line conditions. Test Methods
are aligned with IEC 60068-2 and levels are
similar to MIL-PRF-28800F Class 3.
Safety Complies with European Low Voltage Directive
73/23/EEC, amended by 93/68/EEC
• IEC/EN 61010-1
• Canada: CSA C22.2 No. 61010-1
• USA: UL 61010-1
EMC Complies with European EMC Directive 89/336/
EEC, amended by 93/68/EEC
• IEC/EN 61326
• CISPR Pub 11 Group 1, class A
• AS/NZS CISPR 11:2002
• ICES/NMB-001
Memory Memory is shared by instrument states, sweep list
files, and other files. There is 512 MB of flash
memory available in the N5181A MXG. Depending
on how the memory is utilized, a maximum of
1000 instrument states can be saved.
General Characteristics