Atec Agilent-E8257D - Manual (Page 7)

7
1. Specifications apply in CW and list/step sweep modes over the 15 to 35 ºC temperature range, with attenuator hold off
(normal operating mode). Degradation outside this range, for ALC power levels > –10 dBm, is typically < 0.3 dB. In ramp sweep
mode (with Option 007), specifications are typical. For instruments with type-N connectors (Option 1ED), specifications are
degraded typically 0.2 dB above 18 GHz. Specifications do not apply above the maximum specified power.
2. Options 550 and 567: 0.03dB/°C (typ) above 2 GHz.
3. Compatible with Agilent EPM Series (E4418B and E4419B) power meters.
Level accuracy with step attenuator (Option 1E1) 1 (dB)
Frequency > +10 dBm +10 to 0 dBm 0 to –10 dBm –10 to –70 dBm –70 to –90 dBm
250 kHz to 2 GHz ±0.6 ±0.6 ±0.6 ±0.7 ±0.8
> 2 to 20 GHz ±0.8 ±0.8 ±0.8 ±0.9 ±1.0
> 20 to 40 GHz ±1.0 ±0.9 ±0.9 ±1.0 ±2.0
> 40 to 50 GHz --- ±1.3 ±0.9 ±1.5 ±2.5
> 50 to 67 GHz --- ±1.5 ±1.0 ±1.5 (typ) ±2.5 (typ)
Level accuracy (measured)
Resolution 0.01 dB
Temperature stability 0.01 dB/°C (typ) 2
User flatness correction
Number of points
2 to 1601 points/table
Number of tables Up to 10,000, memory limited
Path loss Arbitrary, within attenuator range
Entry modes Remote power meter 3 , remote bus, manual
(user edit/view)
0.25
0.2
0.15
0.1
0.05
0
-0.05
-0.1
-0.15
-0.2
Errorr (dB)
Frequency (GHz)
Option 520 with Option 1E1 at -110 dBm (me
0 4 8 12 16 20
Option 550/567 with Option 1E1 at -90 dBm
Errorr (dB)
Frequency (GHz)
0 10 20 30 40 50 60 70
1
0.5
0
-0.5
-1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
Errorr (dB)
Frequency (GHz)
Option 532/540 with Option 1E1 at -110 dBm
0 10 20 30 40