Atec Agilent-E8257D - Manual (Page 12)

12
Residual FM
(RMS, 50 Hz to 15 kHz bandwidth)
CW mode
< N x 6 Hz (typ)
Option UNX/UNR < N x 4 Hz (typ)
Ramp sweep mode < N x 1 kHz (typ)
Broadband noise (CW mode at +10 dBm or maximum specified output
power, whichever is lower, for offsets > 10 MHz)
> 2.4 to 20 GHz < –148 dBc/Hz (typ)
> 20 to 40 GHz < –141 dBc/Hz (typ)
> 40 GHz < –135 dBc/Hz (typ)
Measured RMS jitter 1
Standard
Carrier
SONET/SDH RMS jitter Unit intervals Time
frequency data rates bandwidth (µUI) (fs)
155 MHz 155 MB/s 100 Hz to 1.5 MHz 25 158
622 MHz 622 MB/s 1 kHz to 5 MHz 21 34
2.488 GHz 2488 MB/s 5 kHz to 20 MHz 57 23
9.953 GHz 9953 MB/s 10 kHz to 80 MHz 152 15
39.812 GHz 39812 MB/s 40 kHz to 320 MHz 627 16
Option UNX
Carrier
SONET/SDH RMS jitter Unit intervals Time
frequency data rates bandwidth (µUI) (fs)
155 MHz 155 MB/s 100 Hz to 1.5 MHz 23 151
622 MHz 622 MB/s 1 kHz to 5 MHz 19 30
2.488 GHz 2488 MB/s 5 kHz to 20 MHz 56 22
9.953 GHz 9953 MB/s 10 kHz to 80 MHz 152 15
39.812 GHz 39812 MB/s 40 kHz to 320 MHz 626 16
1. Calculated from phase noise performance in CW mode only at +10 dBm. For other frequencies, data rate, or bandwidths,
please contact your sales representative.