Atec Agilent-2000-X Series - Manual (Page 15)

15
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
* Denotes warranted specifications, all others are typical.
Specifications are valid after a 30-minute warm-up period and from ±10 °C firmware calibration temperature.
** 1 mV/div and 2 mV/div is a magnification of 4 mV/div setting. For vertical accuracy calculations, use full scale of 32 mV for 1 mV/div and 2 mV/div sensitivity setting.
Specification overview
2002A 2004A 2012A 2014A 2022A 2024A
Bandwidth * (–3 dB) 70 MHz 100 MHz 200 MHz
“Calculated rise time (10-90%)” ≤ 5 ns ≤ 3.5 ns ≤ 1.75 ns
Input channels DSOX 2 4 2 4 2 4
MSOX 2 + 8 4 + 8 2 + 8 4 + 8 2 + 8 4 + 8
Maximum sample rate 2 GSa/s half-channel interleaved, 1 GSa/s per channel
Maximum memory depth 100 kpts per channel (standard), 1 Mpt per channel (optional with DSOX2MEMUP)
Display size and type 8.5-inch WVGA with 64 levels of intensity grading
Waveform update rate > 50,000 waveforms per second
Vertical system analog channels
Input coupling AC, DC
Input sensitivity range 1 mV/div to 5 V/div**
Input impedance 1 MΩ ± 2% (11 pF)
Vertical resolution 8 bits
Dynamic range ±8 divisions from center screen
Maximum input voltage CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk
CAT II 300 Vrms, 400 Vpk; with N2862B or N2863B 10:1 probe: 300 Vrms
DC vertical accuracy ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale] **
DC vertical gain accuracy* ±3% full scale (≥ 10 mV/div); ±4% full scale (< 10 mV/div) **
DC vertical offset accuracy ±0.1 div ± 2mV ±1% of offset setting
Channel-to-channel isolation 200 MHz ~ 1 GHz ≥ 40 dB from DC to maximum specified bandwidth of each model
1.5 GHz ≥ 40 dB from DC to 1 GHz, ≥ 35 dB from 1 GHz to 1.5 GHz
Position/offset range 1 MΩ 1 mV to 200 mV/div: ±2 V, > 200 mV to 5 V/div: ± 50V
Hardware bandwidth limits Approximately 20 MHz (selectable)
Horizontal system analog channels
2002A 2004A 2012A 2014A 2022A 2024A
Time base range 5 ns/div to 50 s/div 2 ns/div to 50 s/div
Horizontal resolution 2.5 ps
Time base accuracy* 25 ppm ±5 ppm per year (aging)
Time base delay time
range Pre-trigger Greater of 1 screen width or 200 μs (400 μs in interleaving mode)
Post-trigger 1 s to 500 s
Channel-to-channel deskew range ± 100 ns
Δ Time accuracy (using cursors) ± (time base accuracy* reading) ± (0.0016 * screen width) ± 100 ps