Atec Agilent-N5072A Series - Manual (Page 9)

9
Uncorrected System Performance
User correction: OFF, System error correction: ON
Test Port Output (Source)
Specification (dB)
Description 30 to 300 kHz 300 kHz to 3 GHz 3 to 6 GHz 6 to 8.5 GHz
Directivity 15 (Typ.) 25 20 15
Source match 15 (Typ.) 25 20 15
Refl ection tracking ± 1.5 (Typ.) ± 1.0 ± 1.5 ± 1.5
Transmission tracking ± 1.5 (Typ.) ± 1.0 ± 1.5 ± 1.5
Test port output frequency
Description Specification Typical
Frequency range 1
Option 245
Option 285 30 kHz to 4.5 GHz
30 kHz to 8.5 GHz
Resolution 1 Hz
Source Stability
Standard
Option 1E5
± 7 ppm (5 to 40 ºC)
± 1 ppm (5 to 40 ºC)
± 0.5 ppm/year
CW accuracy
Standard
Option 1E5
± 7 ppm
± 1 ppm
Test port output power 2
Description Specification SPD
Nominal Power
(Preset Power) 0 dBm
Range 3
30 to 300 kHz
300 kHz to 3 GHz
3 to 6 GHz
6 to 8.5 GHz –85 to 10 dBm
–85 to 16 dBm
–85 to 12 dBm
–85 to 10 dBm
Max Leveled Power
30 to 300 kHz
300 kHz to 1 GHz
1 to 3 GHz
3 to 8.5 GHz
16 dBm
20 dBm
18 dBm
Slope from 18 dBm
(3 GHz) to 12 dBm
(8.5 GHz)
Specification (dB)
Description 30 to 300 kHz 300 kHz to 100 MHz 100 MHz to 2 GHz 2 to 4.5 GHz 4.5 to 8.5 GHz
Load match 14 (Typ.) 22 15 11 8
1. Frequency can be set down to 9 kHz
2. Source output performance on port 1 only. Port 2 output performance is typical.
3. Power can be set from –109 to 20 dBm