Atec Agilent-N5072A Series - Manual (Page 11)

11
Test Port Input
Description Specification SPD
Crosstalk 1
30 to 300 kHz
300 kHz to 10 MHz
10 MHz to 3 GHz
3 to 6 GHz
6 to 8.5 GHz –90 dB (Typ.)
–110 dB
–120 dB
–110 dB
–100 dB –95 dB
–120 dB
–140 dB
–130 dB
–120 dB
Test Port Noise Floor 1
30 to 300 kHz
300 kHz to 10 MHz
10 MHz to 3 GHz
3 to 6 GHz
6 to 8.5 GHz –90 dBm/Hz (Typ.)
–101 dBm/Hz
–117 dBm/Hz
–121 dBm/Hz
–117 dBm/Hz –100 dBm/Hz
–109 dBm/Hz
–124 dBm/Hz
–128 dBm/Hz
–128 dBm/Hz
(at 10Hz IFBW)
30 to 300 kHz
300 kHz to 10 MHz
10 MHz to 3 GHz
3 to 6 GHz
6 to 8.5 GHz
–80 dBm (Typ.)
–91 dBm
–107 dBm
–111 dBm
–107 dBm –90 dBm
–99 dBm
–114 dBm
–118 dBm
–118 dBm
Compression level
(at +10dBm input)
Magnitude
30 to 300 kHz
300 kHz to 3 GHz
3 to 8.5 GHz
0.3 dB (Typ.)
0.2 dB
0.2 dB 0.15 dB
0.08 dB
0.1 dB
Phase
30 to 300 kHz
300 kHz to 3 GHz
3 to 6 GHz
6 to 8.5 GHz
7 deg (Typ.)
5 deg
5 deg
5 deg 0.7 deg
0.3 deg
0.6 deg
1.0 deg
0.1 dB Compression Input Level
30 to 300 kHz
300 kHz to 2 GHz
2 to 6 GHz
6 to 8.5 GHz
6 dBm
16 dBm
14 dBm
10 dBm
Damage Level +26 dBm or ± 35 VDC
Trace Noise 2
Description Specification SPD
(test port input level = maximum power in Specifi cation)
Magnitude
30 to 300 kHz, 3 kHz IFBW
300 kHz to 10 MHz, 3 kHz IFBW
10 MHz to 4.38 GHz, 70 kHz IFBW
4.38 to 8.5 GHz, 70 kHz IFBW
0.015 dB rms (Typ.)
0.003 dB rms
0.004 dB rms
0.006 dB rms 0.007 dB rms
0.0005 dB rms
0.001 dB rms
0.0012 dB rms
Phase
30 to 300 kHz, 3 kHz IFBW
300 kHz to 10 MHz, 3 kHz IFBW
10 MHz to 4.38 GHz, 70 kHz IFBW
4.38 to 8.5 GHz, 70 kHz IFBW
0.1 deg rms (Typ.)
0.02 deg rms
0.035 deg rms
0.05 deg rms 0.05 deg rms
0.0025 deg rms
0.0075 deg rms
0.015 deg rms
1. Typical performance might not be met from 60 to 70 kHz.
2. The specifi cation might not be met at the following frequencies: 333.333 kHz, 406.25 kHz, 857.143 kHz, and 928.571 kHz.