Atec Agilent-N5072A Series - Manual (Page 22)

22
Data transfer time 1
Number of Points 51 201 401 1601
SCPI over GPIB
64-bit fl oating point 5 ms 15 ms 28 ms 110 ms
32-bit fl oating point 3 ms 8 ms 15 ms 56 ms
ASCII 21 ms 78 ms 156 ms 618 ms
SCPI over 100 Mbps LAN (Socket) 2
REAL 64 1 ms 1 ms 2 ms 3 ms
REAL 32 1 ms 1 ms 1 ms 2 ms
ASCII 13 ms 47 ms 93 ms 363 ms
SCPI over 100 Mbps LAN (SICL-LAN)
REAL 64 3 ms 3 ms 4 ms 6 ms
REAL 32 3 ms 3 ms 4 ms 4 ms
ASCII 3 ms 7 ms 11 ms 37 ms
SCPI over USB 2
REAL 64 2 ms 2 ms 2 ms 3 ms
REAL 32 2 ms 2 ms 2 ms 3 ms
ASCII 3 ms 9 ms 17 ms 66 ms
SCPI over GPIB/USB (82357B)
REAL 64 8 ms 14 ms 23 ms 77 ms
REAL 32 7 ms 10 ms 14 ms 41 ms
ASCII 74 ms 285 ms 568 ms 2268 ms
COM 3
Variant Type 1 ms 1 ms 1 ms 1 ms
Cycle time vs. IF bandwidth
Condition: NOP=201, system error correction: OFF, Sweep mode: swep
IF BW
(Hz) Cycle
Time
(ms) IF BW
(Hz) Cycle
Time
(ms) IF BW
(Hz) Cycle
Time
(ms) IF BW
(Hz) Cycle
Time
(ms) IF BW
(Hz) Cycle
Time
(ms)
10 19297 100 1931 1000 195 10000 20 100000 3
15 12865 150 1288 1500 130 15000 14 150000 3
20 9649 200 1091 2000 98 20000 11 200000 3
30 6433 300 645 3000 66 30000 8 300000 3
40 4825 400 484 4000 50 40000 6 400000 2
50 3861 500 388 5000 40 50000 5 500000 2
70 2735 700 276 7000 29 70000 4
1. Measured using a VEE Pro 7.0 program running on a 3.2 GHz Pentium 4 DELL Precision 370, Transferred complex S11 data,
using : CALC{1-36} : DATA : FDAT?.
2. USB Test and Measurement Class (TMC) interface that communicates over USB, complying with the IEEE 488.1 and IEEE 488.2 standards.
3. Measured using an E5072A VBA macro running inside the analyzer. Transferred complex S11 data