Atec Agilent-N9038A - Manual (Page 10)

10
1 dB gain compression (two-tone)
RF Input 1; RF2 Input to 1 GHz; RF Input 2 performance = RF Input 1 performance +9 dB 5 to 50 °C
Total power at input mixer
Specification
Typical
Preselector on and off,
preamp off
9 kHz to 10 MHz
10 to 500 MHz
500 MHz to 3.6 GHz
3.6 to 26.5 GHz
0 dBm
+1 dBm
0 dBm
+4 dBm (nominal)
+3 dBm (typical)
+5 dBm (typical)
+4 dBm (typical)
Preselector off, Preamp on 10 MHz to 3.6 GHz
3.6 to 26.5 GHz
Tone spacing 100 kHz to 20 MHz
Tone spacing > 70 MHz
–10 dBm (nominal)
–26 dBm (nominal)
–16 dBm (nominal)
Preselector on, Preamp on 9 kHz to 10 MHz
10 to 500 MHz
500 MHz to 3.6 GHz
3.6 to 26.5 GHz
Tone spacing 100 kHz to 20 MHz
Tone spacing > 70 MHz
–16 dBm (nominal)
–18 dBm (typical)
–16 dBm (typical)
−26 dBm (nominal)
−16 dBm (nominal)
Displayed average noise level (DANL)
(Input terminated, sample or average detector, averaging type = Log, 0 dB input attenuation, IF Gain = High, 20 to 30 °C)
RF Input 1; RF Input 2 to 1 GHz; RF Input 2 performance = RF Input 1 performance +11 dB
Specification Typical including NFE 1
Preselector off, preamp off 20 Hz 2
100 Hz 2
1 kHz 2
9 kHz
100 kHz
1 MHz
10 MHz to 2.1 GHz
2.1 to 3.6 GHz
3.5 to 8.4 GHz
8.3 to 13.6 GHz
13.5 to 17.1 GHz
17.0 to 20.0 GHz
20.0 to 26.5 GHz
–97 dBm
–106 dBm
–118 dBm
–119 dBm
–131 dBm
–150 dBm
–150 dBm
–148 dBm
–148 dBm
–147 dBm
–141 dBm
–142 dBm
–135 dBm
—
—
—
—
—
—
–158 dBm
–157 dBm
–159 dBm
–158 dBm
–151 dBm
–152 dBm
–146 dBm
Preselector off, preamp on 100 kHz
1 MHz
10 MHz to 2.1 GHz
2.1 to 3.6 GHz
3.5 to 8.4 GHz
8.3 to 13.6 GHz
13.5 to 17.1 GHz
17.0 to 20.0 GHz
20.0 to 26.5 GHz
–144 dBm
–162 dBm
–163 dBm
–161 dBm
–164 dBm
–162 dBm
–160 dBm
–158 dBm
–155 dBm
—
—
–175 dBm
–173 dBm
–172 dBm
–173 dBm
–171 dBm
–165 dBm
–162 dBm
Dynamic Range Specifications
1. Typical DANL including NFE = Typical DANL-DANL improvement with NFE
2. Specified for instruments with prefixes MY/SG5213 or greater. Nominal for instruments with earlier prefixes.