Atec Acterna-JDSU-ANT-20SE - Manual (Page 12)

Alarm generation:
AU-AIS, AIS-C1...AIS-C16,
AU-LOP, LOP-C1...LOP-C16
Error measurement and alarm detection:
AU-AIS, AU-LOP
Bit errors
Automatic Protection Switching
Sensor: MS-AIS, AU-AIS
Solutions for 10 Gbit/s
With the new ANT-10Gig we provide a 10 Gbit/s solution which covers
OC-192 as well as STM-64. The ANT-10Gig allows testing at the
highest line bit rate and in all mappings below and offers optionally all
testing down to n664 kbit/s.
For detailed information please refer to data sheet ªANT-10Gigº.
The ANT-20SE is prepared for upgrades towards STM-64/OC-192.
Further options
Optical Power Splitter (90%/10 %) BN 3060/91.05
The Optical Power Splitter is built into the ANT-20SE.
Three optical test adapters are required to operate it; please indicate
your choice.
The Optical Power Splitter provides an optical monitor point. The
input signal is passed through to the output transparently.
Light energy forwarded . . . . . . . . . . . . . . . . . . approx. 90 % (±0.45 dB)
Light energy coupled out . . . . . . . . . . . . . . . . . approx. 10 % (±10 dB)
The Optical Power Splitter operates in the following ranges:
Wavelengths . . . . . . . . . . . . . . . 1260 to 1360 nm and 1500 to 1600 nm
OLA-15 Optical Attenuator (variable) BN 2239/01
One application of OLA-15 is in
line-up of optical links, where line
interruptions are simulated for bit
error testing. The device is also useful
when measuring the sensitivity of
optical receivers. With its wide variable
attenuation range and highly accurate
and reproducible attenuation settings,
the OLA-15 is an ideal companion to
the ANT-20SE.
Calibrated at . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1310 and 1550 nm
Attenuation range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 to 60 dB
Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.05 dB
See OLA-15 data sheet for details.
12