Atec Agilent-83491A-92A - Manual (Page 16)

16
Dual Mode Optical Modules 1 86111A 86111U 86113A 86115B
OPTICAL CHANNEL SPECIFICATIONS
Optical Channel Unfiltered Bandwidth 2.85 GHz 15 GHz 2.85 GHz 28 GHz
Wavelength Range 750-860 nm 1000–1600 nm
Calibrated Wavelengths 850 nm 1310/1550 nm
Optical Sensitivity 1 –17 dBm –7.5 dBm –20 dBm –7 dBm
Transition Time (10% to 90%,calculated from TR = 0.48/BW optical)
Unfiltered
160 ps 32ps 160 ps 18 ps
RMS Noise
Characteristic
1.5 µW 14µW 1.0 µW 13 µW (Filtered)
23 µW (Unfiltered)
Maximum 2.5 µW 20 µW 2.5 µW 15 µW (Filtered)
30 µW (Unfiltered)
Scale Factor
Minimum
5 µW 20 µW 5 µW 20 µW
Maximum 100 µW 500 µW 100 µW 500 µW
CW Accuracy (single marker, referenced ±6 µW ±0.4% of 25 µW ±2% of ±6 µW ±0.4% of ±50 µW ±4% of
to average power monitor) full scale ±3% of (reading-channel offset), full scale ±3% of (reading-channel
(reading-channel offset) 15 GHz (reading-channel offset) offset)
CW Offset Range (referenced two
divisions from screen bottom)
+0.2 mW to –0.6 mW +1 mW to –3 mW +0.2 mW to –0.6 mW +1 mW to –3 mW
Average Power Monitor
(specified operating range)
–30 dBm to –2.2 dBm –27 dBm to +3 dBm –30 dBm to 0 dBm –27 dBm to +3 dBm
Factory Calibrated Accuracy
Single mode
±5% ±100 nW ±connector uncertainty, (20°C to 30°C)
Multi mode ±10% ±100 nW ±connector uncertainty, (20°C to 30°C) N/A
User Calibrated Accuracy ±2% ±100 nW ±power meter uncertainty, <5°C change
Maximum Input Power
Maximum non-destruct average
0.4 mW (–4 dBm) 2 mW (+3 dBm) 0.4 mW (–4 dBm) 2 mW (+3 dBm)
Maximum non-destruct peak 10 mW (+10 dBm)
Fiber Input 62.5/125 µm, 9/125 µm, user
user selectable connector selectable connector
Input Return Loss
(HMS-10 connector fully filled fiber)
20dB 30 dB
1 Requires the 86100A/B software revision 3.0 or above.
Module Specifications: Dual Optical