Alpha Technologies Cordex CXCRF 48-300W - Manual (Page 8)

0300072-J0 RevA Page 4 of 46
1 SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important safety instructions that must be followed during the installation, servicing, and
maintenance of the product. Keep it in a safe place. Review the drawings and illustrations contained in this
manual before proceeding. If there are any questions regarding the safe installation or operation of this
product, contact Alpha Technologies or the nearest Alpha representative. Save this document for future
reference.
1.1 Safety Symbols
To reduce the risk of injury or death and to ensure the continued safe operation of this product, the following
symbols have been placed throughout this manual. Where these symbols appear, use extra care and attention.
The use of ATTENTION indicates specific regulatory/code requirements that may affect the placement of
equipment and /or installation procedures.
NOTE
A note provides additional information to help complete a specific task or procedure. Notes are
designated with a checkmark, the word NOTE and a ruled line beneath which the relevant
information appears.
CAUTION
CAUTION! Indicates safety information intended to PREVENT DAMAGE to material and
equipment. Cautions are designated with a yellow warning triangle, the word CAUTION and a
ruled line beneath which the relevant information appears.
WARNING
WARNING! Presents safety information to PREVENT INJURY OR DEATH to personnel.
Warnings are indicated by a shock hazard icon, the word WARNING and a ruled line beneath
which the information appear.
1.2 General Warnings and Cautions
You must read and understand the following warnings before installing the 48-300W Modular Switched Mode
Rectifier System and its components. Failure to do so could result in personal injury or death.
• Please read this manual before using the system, in order to become familiar with the numerous
features of the product and the relevant operating procedures. To ensure the maximum degree of safety,
follow the sequences as outlined.
• Before using the product, read all instructions and cautionary markings on the product and any
equipment connected to the product.
• Only qualified personnel are allowed to install, operate and service this system and its components.
• Do not work alone under hazardous conditions.
• Use proper lifting techniques whenever handling equipment, parts or batteries.
• Always assume electrical connections or conductors are live. Turn off all circuit breakers and double-
check with a voltmeter before performing installation or maintenance.