2 safety markings, Safety markings – Alpha Technologies Cordex CXCRF 48-300W User Manual
Page 21

0300072-J0 RevA
Page 17 of 46
3.2 Safety Markings
This equipment is a Class 1 appliance.
Applicable standards:
•
CE marking for Low Voltage Directive 73/23/EEC.
•
EN 60950-1, CEBEC approval pending.
Leakage current
Mains cables
Supply sources
DC outputs
External batteries
Warning to be placed by the final user on the complete system or close to the batteries:
WARNING
High Energy Hazard
Each external battery string MUST be protected according to the
system power and the installed cross-section of the cable.
The fuse or disconnect device must be capable of
interrupting the current in the event of a short-circuit.
The short-circuit current of the batteries is specified
by the manufacturer.
WARNING
High Energy Hazard
WARNING
EQUIPMENT WITH MULTIPLE SUPPLY SOURCES
ENERGY ON AC INPUTS & DC BATTERY TERMINALS
DISCONNECT BOTH BEFORE ANY INTERVENTION
DOUBLE INSULATION REQUIRED BETWEEN PRIMARY AND SECONDARY
SUPPLEMENTARY SLEEVING MUST BE PLACED ON MAINS WIRES
IF THE PROTECTIVE REAR COVER (OPTIONAL) IS NOT FITTED
Earth connection essential
before connecting supply