Alpha Technologies Cordex CXCRF 48-300W - Manual (Page 10)

0300072-J0 RevA Page 6 of 46
2 PRODUCT OVERVIEW
2.1 General Overview
The user manual explains the installation, interconnections and operation of Alpha Technologies 48-300W
Modular Switched Mode Rectifier System. Listed below are the possible product configurations:
2.2 Part Numbers and List Options
Description:
Cordex HP 48-300W rectifier power module
0100010
Cordex 48-300W 19in 1RU shelf system, front/back access
with controller and DC distribution 0300072
Comp@s supervisory communication card 7400325
Dummy module for empty rectifier slot 0100010-001
AC power cord C15 18AWG, right angle 8700551
2.3 Stand-alone Energy System
Figure 1: Stand-alone energy system including controller with LCD
This stand-alone energy system includes a controller board on the left and a modular distribution unit with 4
outlets protected by alarm-indicating fuses, a battery circuit breaker and an internal LVD. The distribution unit
allows the user to connect the loads, the battery and the battery temperature sensor directly on the front of the
system.
The controller board can be one of two types:
1. Controller board with LCD screen – 1RU high (see Figure 1)
2. Controller board without LCD screen – 0.5RU high. A communication card for can be added on top of
the controller (see Figure 2).
The controller board can be equipped with a Comp@s card. This allows the user to configure, monitor and
control the entire power system and auxiliary components from a computer.