ABUS TVHD80010 Operating instructions User Manual

Page 115

Maintenance

115

In “Destination Address”, you can check the connection
to another device, such as a computer (‘pinging’). Enter
the network address of the device to be checked (e.g.
192.168.0.25) and press Test.

Information on two parameters appears:

Parameter

Setting

Average
delay

The time the pinged device needs to
reply.

Packet loss
Rate:

Displays the percentage of packets
that were not transmitted

Note
If the packet loss rate is high, we recommend that
the “Network Test” is repeated.

Note
If the packet loss rate is still high, you should
check that the cables are correct and not dam-
aged.
The higher the packet loss rate, the poorer the
connection between the pinged device and re-
corder.

For “Network Packet Export”, you can export the settings
of the individual connections or – depending on the set-
ting – the connection.

3. For “Device Name”, select a storage medium to save

the settings to.

4. Click Export.

After the progress display finishes and initializa-
tion is successful, an information window ap-
pears. Close it with OK.

 Click

Status to display the status of the LAN connec-

tions (connected/not connected).

 Click

Network to change your network settings (see

p. 106).

Shutdown

Note

 Select “Lock” to lock the operating menu.
 Select “ShutDown” to switch off the device.
 Select “Reboot” to reboot the system (switch

off and back on).