ABUS FU9001 Privest Wireless Alarm Base Set Operating instructions - Manual (Page 47)

43
5 Codes
1
User codes You have four options:
[1] Define / change:
Here you can enter, edit and delete user PINs
as described in section 5.1.
[2] Authority:
Assign an authority level to user PINs.
[3] Partition:
Assign user PINs to partitions.
[4] Name:
Assign names to the user PINs (e.g.: names
with max. 10 characters).
2 Remote phone code A remote access PIN consists of two digits. It is
entered to operate the system by telephone.
Only the Grand Master can program this PIN.
6 Clocks
1
System Time Sets the system time.
2 System Date Sets the system date.
3 Next arm Automatically reactivates a deactivated system
at a defined time (within the next 24 hours). This
setting is deleted after it is carried out. That
means that it works only at a specific time.
4 Next disarm Automatically deactivates an activated system
at a defined time (within the next 24 hours). This
setting is deleted after it is carried out. That
means that it works once only at a specific time.
5 Scheduler Use this function to schedule automatic actions
of the ABUS wireless alarm system. You can
define two time windows per day in which your
system:
– automatically activates/deactivates
– controls switch outputs
– prevents specific users from deactivating the
system.
See also section 6.3.1.
6 Vacation Defines up to 20 holiday periods in which the
ABUS wireless alarm system (or your selected
partition) is activated.