ABUS FU9001 Privest Wireless Alarm Base Set Operating instructions - Manual (Page 37)

33
6.2 Entering Follow Me (FM) numbers:
If an event occurs (an alarm was triggered), the ABUS wireless alarm system informs
you about the current situation (e.g.: burglary or fire) by telephone. Tone signals or voice
messages are transmitted to report this event.
Die ABUS wireless alarm system can dial up to 4 telephone numbers. These numbers
are known as Follow Me numbers (FM numbers). Apart from yourself, up to 3 other
persons (friends, neighbours, etc.) can be informed about the current situation by
telephone.
To edit/enter an FM number:
1. Under user functions, press [2] for Activities.
2. Select
[2] for Follow Me.
3. Select [1] for Define. (This is possible only if the Follow Me function is
enabled under Installer menu -> Dialer.)
4. Enter your user PIN and press .
5. Select the FM number (1–4) that you want to enter/edit. The FM index number
is the number you assign to a telephone number.
6. Enter the telephone number including the local area code (if necessary), and
press . (An FM telephone number can consist of up to 32 digits.)
7. After entering the telephone number, decide what permissions you want to
give this FM number for remote access in the operation menu (see section 4.2)
and in the confirmation menu (see section 4.3.2).
8. You have two ways of defining authorisation for an FM number in the
operation menu. “Y” or “N” (see next line). Press to select between Y
and N, and press to confirm.
[Y]: The user of this FM number has access to the operation menu. The user has
access to the options available here.
[N]: The user of this FM number has no access to the operation menu.
9. You have two ways of defining authorisation for an FM number in the
confirmation menu. “Y” or “N”.