ABUS FU9001 Privest Wireless Alarm Base Set Operating instructions - Manual (Page 16)

12
2.3.3 Ready LED (green LED at position 3)
The READY LED shows whether the zones of the system can be activated.
State Description
ON
All zones are closed. The system can be
activated.
OFF One or more zones are not closed, and the
system cannot be activated. Before
activating the system, you have to close the
zones.
The READY LED also switches off during
certain system faults.
SLOW FLASHING Shows that the system can be activated
even if a particular line (e.g.: entrance door,
window) remains open.
2.3.4 Omit LED (yellow LED at position 4)
The OMIT LED shows whether there are any omitted zones in the system. (An omitted
zone is a zone that has been excluded from monitoring even though it has a sensor.)
State Description
ON
At least one zone was omitted; OR: The
ABUS wireless alarm system was
activated internally.
OFF
No zones omitted;
OR: The ABUS wireless alarm system
was activated externally (although omitted
zones exist).
2.3.5 Fault LED (red LED at position 5)
The FAULT LED displays system faults.
State Description
FAST
FLASHING
At least one fault exists in the
system.
OFF
No system faults present.