ABUS FU9001 Privest Wireless Alarm Base Set Operating instructions - Manual (Page 40)

36
6.3.2 Programming a switch / ulitiy output
Use a schedule for switch outputs to switch selected outputs automatically at times
defined by you (for example, to control entrance lighting). You can also program switch
outputs to be in operation simultaneously.
When you create this schedule, you define the following parameters: Utility outputs,
Time schedule, vacation and label
To create a schedule for the automatic switching of a switch output:
1. Follow steps 1 to 4 in section 6.3.1 (“Schedule for automatic system
activation/deactivation”).
2. Select [2] for UO on/off.
3. Follow the instructions on the LCD display. These instructions guide you
through the remaining programming steps.
IMPORTANT:
In the switch output schedule, option [3] for vacation defines how the outputs are
activated during the holidays:
[N] means: During the holidays, the switch outputs are activated the same as in the
other weeks.
[Y] means: During the holidays, the switch outputs are activated according to a
schedule.
6.3.3 Restriction program for users
This restriction program prevents selected users from deactivating the ABUS wireless
alarm system at times defined by you.
When you create a restriction program for users, you define the following parameters:
User, schedule, schedule name
IMPORTANT:
In the default factory setting, all users can operate the system without restriction.
To create a restriction program for users:
1. Follow steps 1 to 4 in section 6.3.1 (“Schedule for automatic system
activation/deactivation”).
2. Select [3] for User limit
3. Follow the instructions on the LCD display. These instructions guide you
through the remaining programming steps.