ABUS FU8006 Secvest 2WAY Wireless Alarm Control Panel (UK, DK, IT) Operating instructions User Manual
Page 30
30
18.7. Additional functions
In this menu, a user can switch the functions assigned to them by the installer
on and off.
Select the Facilities On/Off menu item.
Seven menu items are available for selection.
Function
Meaning
Chime
When deactivated, the system emits a signal tone if
a door chime detector is triggered. This signal tone
can be deactivated here.
Voice Prompts
Activates and deactivates the voice prompt.
Activity Monitor
Activates and deactivates activity monitoring of the
social care call.
B’Light Brightness
Sets the backlight brightness in 4 steps
.
B’Light Always
Backlight is permanently on/off.
Wall Light
Off:
Wall light is permanently off.
On:
Wall light is illuminated when the
system is active, flashes in the
event of an alarm and is not lit
when the system is deactivated.
Timed: Wall light is illuminated for 5 minutes
when activated and flashes in the event of
an alarm
.
Zone Name Prompts
Activated:
Yes/no
Voice Prompts:
2 second prompt for each
zone
This function is activated as follows and zone
names are recorded:
User Menu
Æ
Facilities On/Off
Æ
Zone Name
Prompts
Æ
Enabled
Æ
Yes
The following additional prompt is then announced:
x With opened zone
Æ
“The System cannot
set” + “
with the smallest zone number is also announced.
x In the event of an alarm
o Speech dialler: The first triggered
zone is also announced after
“Home Message” and “Message
x”.
o Alarm centre: The first triggered
zone is announced for each
partition, starting with the partition